Digitrax DN126M2 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digitrax DN126M2. Digitrax DN126M2 8 pages.

Customizing Your Decoder

Your Digitrax decoder is ready to run

and will operate using address 03 with

no additional programming. For a more

prototypical railroading experience,

your decoder can be customized for your

specific locomotive by programming

some of the Configuration Variables, or

CVs, available. See the Digitrax Decoder

Manual or the Digitrax web site for more

information.

Changing the Decoder Address

The first CV most people change is the decoder address. This allows you to inde-

pendently control each loco with a unique address. Digitrax decoders are shipped

with CV01 (AD2), the two digit address, set to 03. Following is a brief description

of how to change the decoder address with a Digitrax DT4XX series throttle. See

your Starter Set Manual for complete programming instructions.

Go into DIRect Mode Programming on your system On the DT4XX

throttle press PROG until DIR is displayed.

Choose AD2 for 2 digit addressing or AD4 for 4 digit addressing.

Choose the address you want to set up for the decoder.

Complete address programming by pressing ENTER.

Note: CV29 must also be programmed to enable 4 digit addressing, this is done

automatically by the DT4XX throttles. See your Digitrax Decoder Manual or the

Digitrax Toolbox App for how to set up CV29.

Digitrax LocoMotion

Your locomotives look like the real thing, now you can make them run like the

real thing, too. Digitrax decoders incorporate torque

compensation for smooth as silk operation. You can also program CVs that

control momentum, 3 step and 128 step speed tables, switching speed, normal

direction of travel, scalable speed stabilization and more to take full advantage of

the Digitrax LocoMotion System.

Figure 4. Decoder Installed

System

— 3 —

Wires inserted in decoder

Decoder Installed