Digitrax DS51K1 Instructions d'installation
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Digitrax DS51K1. Digitrax DS51K1 2 pages. Stationary decoder for use with a single kato unitrack bi-polar turnout machine or similar device n and ho scales 1/2 amp maximum
Imprimer la page
Complete Train Control
Run Your Trains, Not Your Track!
DS51k1
Stationary Decoder for use with a
single kato Unitrack bi-polar
turnout machine or similar device
Features
Simple hook up and set up.
Kato Unitrack compatible bi-polar drive.
DCC compatible.
Parts List
1 DS51K1 Stationary Decoder
Installation Instructions
DS51K1 Installation
1. Turn off track power.
2. Connect the orange and gray wires from the DS51K1 to the turnout motor.
3. Connect the red and black wires from the DS51K1 to the track.
DS51K1 Address Programming
1. Turn off track power and temporarily connect the yellow programming
wire from the DS51K1 to the same rail as the black wire.
2. Turn on track power.
3. Using your throttle, select the address you want to program into the
DS51K1 and press either c (closed) or t (thrown) to operate the turnout and
program the address.
4. Disconnect the yellow programming wire from the track and fold it away so
that it can't make contact with the track.
DS51K1 Operation Notes:
DS51K1 is designed to work with turnout machines with SINGLE bipolar
coils ONLY. Use of this decoder with other types of turnout machines
will destroy the decoder and will not be covered under warranty.
Please see www.digitrax.com/prd_statdec_ds51k1.php the correct link is
for a list of Kato turnouts that are compatible with DS51K1.
Digitrax gives a one year "No Worries" Warranty against manufacturing
defects and accidental customer damage on all Digitrax products.
Visit www.digitrax.com for complete warranty details and instructions for
returning items for repair.
Damaged decoders should be returned directly to Digitrax for repair.
©2011 Digitrax, Inc.
www.digitrax.com
N and HO Scales
1/2 Amp Maximum
1 Instruction Card
1
Complete Train Control
Run Your Trains, Not Your Track!
DS51k1
Stationary Decoder for use with a
single kato Unitrack bi-polar
turnout machine or similar device
Features
Simple hook up and set up.
Kato Unitrack compatible bi-polar drive.
DCC compatible.
Parts List
1 DS51K1 Stationary Decoder
Installation Instructions
DS51K1 Installation
1. Turn off track power.
2. Connect the orange and gray wires from the DS51K1 to the turnout motor.
3. Connect the red and black wires from the DS51K1 to the track.
DS51K1 Address Programming
1. Turn off track power and temporarily connect the yellow programming
wire from the DS51K1 to the same rail as the black wire.
2. Turn on track power.
3. Using your throttle, select the address you want to program into the
DS51K1 and press either c (closed) or t (thrown) to operate the turnout and
program the address.
4. Disconnect the yellow programming wire from the track and fold it away so
that it can't make contact with the track.
DS51K1 Operation Notes:
DS51K1 is designed to work with turnout machines with SINGLE bipolar
coils ONLY. Use of this decoder with other types of turnout machines
will destroy the decoder and will not be covered under warranty.
Please see www.digitrax.com/prd_statdec_ds51k1.php the correct link is
for a list of Kato turnouts that are compatible with DS51K1.
Digitrax gives a one year "No Worries" Warranty against manufacturing
defects and accidental customer damage on all Digitrax products.
Visit www.digitrax.com for complete warranty details and instructions for
returning items for repair.
Damaged decoders should be returned directly to Digitrax for repair.
©2011 Digitrax, Inc.
www.digitrax.com
N and HO Scales
1/2 Amp Maximum
1 Instruction Card
1