argon audio Radio 3i MK2 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} argon audio Radio 3i MK2. argon audio Radio 3i MK2 16 pages.
Également pour argon audio Radio 3i MK2 : Démarrage rapide (2 pages)

Imprimer la page

3. Getting started

Although the Radio 3i MK2 is sophisticated, getting started is simple. To play DAB or FM radio or Bluetooth

audio, all you need is a power source (a 100-240V mains supply).

For Internet-connected modes such as Internet radio or Spotify Connect, you also need an internet

connection.

To set up the Radio 3i MK2:

1. Place Radio 3i MK2 on a suitable shelf or table

2. Connect the power adaptor between Radio 3i MK2 and the mains supply.

3. To receive broadcast radio (DAB and FM), extend the telescopic antenna.

The setup wizard starts.

3.1 Setup wizard

When Radio 3i MK2 is started for the first time, it runs through a

setup wizard to configure settings for date/time and network.

Once this has finished, the system is ready to use in most

modes.

Note: To change these settings later, select Menu > System

settings >. To run the setup wizard again, select Menu >

System settings > Setup wizard.

Select Yes to start the setup wizard.

If you choose No, the next screen asks if you would like to run

the wizard next time Radio 3i MK2 is started. The system then

starts without configuring time/date and network settings and

enters the Main Menu.

Note: If power is removed while the wizard is in progress, the

wizard will run again next time Radio 3i MK2 is started.

3.1.1 12/24 hour display

To change between 12 and 24 hour display, select Set 12/24 hour and then select your preference.

3.1.2 Auto-update (time)

Auto-update works with data sent over DAB, FM or the Internet.

The clock is only updated when in a corresponding mode, so it is

best to select a mode you use regularly.

DAB and FM use time signals broadcast with

radio transmissions.

Network uses a time signal sent from the Frontier Silicon Internet

radio portal when in any network-connected mode.

1. Select Update from DAB, Update from FM, Update from Network or No update.

2. If you are updating from the network, set your time zone.

3. If your country uses daylight saving, the automatically updated time from the network may be

wrong by one hour. When daylight savings are in effect (during the winter), turn on the Daylight

savings option to rectify this.

w w w . a r g o n a u d i o . c o m

R a d i o 3 i M K 2