Digitrax DN143IP Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digitrax DN143IP. Digitrax DN143IP 8 pages. Complete train control

Imprimer la page

Parts List

1 DN143IP Decoder

Installation Information

See the Digitrax Decoder Manual for complete decoder test procedures, instal-

lation instructions, programming and technical information. Digitrax manuals

and instructions are updated periodically. Please visit www.digitrax.com for the

latest versions, technical updates and additional locomotive-specific installation

instructions.

Installation Instructions

1. The installation will be in the tender of the Con-Cor 4-8-4 locomotive.

Carefully remove the tender's shell from the frame.

2. Remove the factory installed DCC dummy plug. (See photo)

3. Insert the DN143IP medium plug pins in the socket. Pin 1 will be the bot-

tom right socket when viewed. (See photo)

4. Replace the tender shell. It may be necessary to trim the underside of the

tender top to allow it to snap into place.

5. You are now ready to run your locomotive. The DN143IP is factory pro-

grammed to address 03. You can easily customize the address and other fea-

tures. See section "Customizing Your Decoder" that follows.

Complete Train Control

Run Your Trains, Not Your Track!

www.digitrax.com

1 Instruction sheet