Digitrax DZ123MK0 Manuel de démarrage rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Digitrax DZ123MK0. Digitrax DZ123MK0 8 pages. Complete train control
Imprimer la page
Changing the Decoder Address
The first CV most people change is the decoder address. This allows you to
independently control each loco with a unique address. Digitrax decoders are
shipped with CV01 (AD2), the two digit address, set to 03. Following is a brief
description of how to change the decoder address with a Digitrax DT series
throttle. See your Starter Set Manual for complete programming instructions.
1. Place the loco on the programming track. Go into Program Mode on your system.
On DT400/DT402 press PROG. On DT300, DT100 & DT200 press RUN/STOP &
FN/F0.
2. Choose AD2 for 2 digit addressing or AD4 for 4 digit addressing (DT400/DT402
and DT300). (Ad for DT100 & DT200, see set manual for 4 digit instructions).
3. Choose the address you want to set up for the decoder.
4. Complete address programming. On DT400/DT402 press ENTER. On DT300,
DT100 & DT200 press SEL.
Note: CV29 must also be programmed to enable 4 digit addressing, this is
done automatically by the DT400/DT402 & DT300 but not on earlier throttles.
Digitrax LocoMotion® system
Your locomotives look like the real thing, now you can make them run like the
real thing, too. Digitrax decoders incorporate torque compensation for smooth
as silk operation. You can also program CVs that control momentum, 3 step
and 128 step speed tables, switching speed, normal direction of travel,
scaleable speed stabilization and more to take full advantage of the Digitrax
LocoMotion
®
System.
Momentum-CV03 & CV04
Momentum is part of the LocoMotion
CV03 and deceleration by CV04. Both come from the factory set to 000. A
range of 000 to 031 is available for both accel and decel. Try CV03:003 and
CV04:000 as a starting point for experimenting with momentum.
©2012 Digitrax, Inc
Complete Train Control
Run Your Trains, Not Your Track!
www.digitrax.com
®
System. Acceleration is controlled by
4