Digitrax SoundFX SDXH186MT Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digitrax SoundFX SDXH186MT. Digitrax SoundFX SDXH186MT 16 pages. Complete train control

Imprimer la page

Parts List

1 SDXH186MT Function Decoder with SoundFX

1 Instruction Sheet

Installation Information

See the Digitrax Decoder Manual for complete decoder test procedures, instal-

lation instructions, programming and technical information. Digitrax manuals

and instructions are updated periodically. Please visit www.digitrax.com for the

latest versions, technical updates and additional locomotive-specific installation

instructions. CAUTION: Programming and layout track must not exceed

16V when using this decoder.

Installation Instructions

Carefully remove the locomo-

tive shell. (Figure 1) Note

the orientation to the frame

for correct re-installation.

Arrange internal wires to

expose the jumper board in the

locomotive.

Remove the jumper board

from the locomotive's 21MTC

pins. (Figure 2) The jumper

board allows the loco to op-

erate on a standard DC track

or in analog mode on a DCC

track. If the loco also has

a 8pin NMRA socket, any

jumpers should also be

removed.

Insert the 21MTC socket onto

the exposed pins. The black

socket and the decoder text

should be facing up. The

socket is indexed so it will only

fit on in one configuration.

(Figure 3) Seat the decoder

firmly on the pins.

Figure 1: Remove loco shell

Figure 2: Carefully

remove jumper board

Figure 3:

Carefully plug in decoder. Shown with op-

tional SP2615BC speaker.

— 2 —