argon audio Stream 3 MK2 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} argon audio Stream 3 MK2. argon audio Stream 3 MK2 16 pages.

3. Getting started

Although the Stream 3 MK2 is sophisticated, getting started is simple. To play DAB or FM radio or Bluetooth

audio, all you need is a power source (a 100-240V mains supply).

For Internet-connected modes such as Internet radio or Spotify Connect, you also need an internet

connection.

To set up the Stream 3 MK2:

1. Place Stream 3 MK2 on a suitable shelf or table

2. Connect the power adaptor between Stream 3 MK2 and the mains supply.

3. To receive broadcast radio (DAB and FM), plug in the supplied antenna cable.

The setup wizard starts.

When Stream 3 MK2 is started for the first time, it runs through a

setup wizard to configure settings for date/time and network.

Once this has finished, the system is ready to use in most modes.

Note: To change these settings later, select Menu > System

settings >. To run the setup wizard again, select Menu > System

settings > Setup wizard.

Select Yes to start the setup wizard.

If you choose No, the next screen asks if you would like to run the

wizard next time Stream 3 MK2 is started. The system then starts

without configuring time/date and network settings and enters

the Main Menu.

Note: If power is removed while the wizard is in progress, the

wizard will run again next time Stream 3 MK2 is started.

To change between 12 and 24 hour display, select Set 12/24 hour and then select your preference.

Auto-update works with data sent over DAB, FM or the Internet. The

clock is only updated when in a corresponding mode, so it is best to

select a mode you use regularly.

DAB and FM use time signals broadcast with

radio transmissions.

Network uses a time signal sent from the Frontier Silicon Internet

radio portal when in any network-connected mode.

1. Select Update from DAB, Update from FM, Update from Network or No update.

2. If you are updating from the network, set your time zone.

3. If your country uses daylight saving, the automatically updated time from the network may be

wrong by one hour. When daylight savings are in effect (during the winter), turn on the Daylight

savings option to rectify this.

Note that if you are updating the time from DAB or FM, the Daylight savings option has no effect on the

clock's time.

w w w . a r g o n a u d i o . c o m

S t r e a m 3 M K 2