Digitrax DN136D Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digitrax DN136D. Digitrax DN136D 8 pages. Complete train control

Imprimer la page

Function Outputs on the DN136D

The DN136D is set up at the factory to control three function outputs. The

DN136D is configured to control the forward and reverse lights on the locomo-

tive through the white lead and yellow lead using Function 0 (F0F-forward and

F0R-reverse) for directional lighting. Function F1(Green) is part of the harness

for easy hookup.

All three function outputs can be easily set up with Digitrax FX

or as standard on/off functions with the following operational qualifiers:

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

Function Remapping

Function remapping allows you to program the function outputs of your decoder

to be controlled by selected function keys on your throttle. Please consult the

Digitrax Decoder Manual or website for information on function remapping.

Master Light Switch

Each of the three function outputs can be programmed to turn on and off with the

F0 ON/OFF key on your throttle, creating a Master Light Switch. The CV

values for creating this effect are listed in the Digitrax Decoder Manual in the

section: Setting up FX & FX3 Effects On Function Outputs.

— 6 —

lighting effects