Digitrax SD45T-2 Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Digitrax SD45T-2. Digitrax SD45T-2 8 pages.

Function Outputs on the DN166I0

The DN166I0 is set up at the factory to control six functions. The unit is prewired

with two golden-white LEDs set up for directional lighting as F0F/F0F+ for the

front light and F0R/F0R+ for the rear light. Functions F1 (Green), F2 (Violet), F3

(Brown) and F4 (White/Yellow) can be used by soldering a wire from the pad for

the function you wish to use to the lamp (or other function) you wish to control.

The wire colors indicated are the standard color code used in the industry (you

can use any color you like). These colors are important if you plan to use function

remapping.

All six function outputs can be easily set up with Digitrax FX3 lighting effects

or as standard on/off functions with the following operational qualifiers:

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

Figure 4: Function Outputs on Your DN166I0 (Top View)

LED Leads

Leading to

Front Light

+Common

Function Remapping

Function remapping allows you to program the function outputs of your decoder

to be controlled by selected function keys on your throttle. Please consult the

Digitrax Decoder Manual or website for information on function remapping.

Motor Contact

Slots

(White/Yellow)

— 6 —

Function 2

(Violet)

Function 4

www.digitrax.com

Function 1

(Green)

Function 3

(Brown)