Digitrax SoundFX SDH187MT Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digitrax SoundFX SDH187MT. Digitrax SoundFX SDH187MT 12 pages.

The SDH187MT plays a Steam scheme, but I want the default

Diesel scheme: If the factory sound project with the 8 schemes has

not been changed, program CV60 back to a value of 00 to reselect the

default GP38 diesel scheme. The SDXH167 sound project is on the web

site so you can reload this if you get lost. Program CV8 to 8 to restore

factory settings.

I have loaded a new sound project but, the CVs and Function

controls are not what I expected: In SoundLoader II, open the

sound project .spj file you programmed with "File>Open Sound Project

File". Now select "View>View Project Description", the Project descrip-

tion should define how the project operates and how CVs and functions

are configured for sound generation.

I have loaded new .wav files for a bell in 16 bit resolution vs the

12 bit, but don't hear much difference. Why? With most small

speaker systems it is tough to hear difference between a 12 and 16 bit

download, or even an 8 and 16 bit download. This is particularly true if

the is any noise in the layout room. In most cases the extra cost for "CD

quality sound" is not justified. With a number of sound locomotives run-

ning at same time it gets quite noisy, and so many operators simply turn

down the decoder volumes anyway.

I want to load new .wav files with 12 bit resolution instead of 8

bit, but do not have enough room in the sound flash. Save your

project (.spj ) to a new named project: " File> Save Sound Project File As"

saves the project file with a new name. Next, right click on any .wav file

you do not need or use, and select "Remove Association". This will skip

this .wav when pressing the green download "ALL", or "Program Wavs"

button, and the SFX decoder will not output this, or ignore/ skip this

sound as silence. This frees up memory for you to download 12 or 16 bit

.wav files that you wish to use, and be within the memory size available.

You can skip all .wav files that are not needed for the scheme you want to

run, and/or can substitute any .wav versions you may prefer. Remember

to save any modified project version with "File> Save Sound Project File".

If you have free memory, you can download any single .wav by right

clicking on the .wav entry and selecting "Download this Sound".

— 10 —