argon audio SUB10 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} argon audio SUB10. argon audio SUB10 7 pages.

Imprimer la page

Environmental information

Argon SUB10 Subwoofer complies with international

directives on the Restriction of Hazardous Substances

(RoHS) and Waste of Electrical and Electronic Equipment

(WEEE) - the crossed bin symbol indicates compliance and

that the products must be appropriately recycled or

processed in accordance with these directives.

Safety instructions

Please store this instruction manual for future reference.

Do not use this product near water or moisture. Clean only

with a dry cloth. Unplug this product from the wall outlet

before cleaning. Place the unit on a solid surface. Do not

block any ventilation openings. Do not put it in a closed

bookcase or a cabinet that may keep air from flowing

through its ventilation openings. Do not install near any heat

sources, such as radiators, heat registers, stoves or other

appliances that produce heat. Protect the power cord from

being walked on or pinched, particularly at plugs and the

point where they exit from the product. Servicing is required

when the product has been damaged. Do not attempt to

service this product yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards.

Please contact the manufacturer to be referred to an

authorized service center near you. To prevent risk of fire or

electric shock, avoid over loading wall outlets, extension

cords, or integral convenience receptacles. Do not let

objects or liquids enter the product. Use proper power

w w w . a r g o n a u d i o . c o m

sources. Plug the product into a proper power source, as

described in the operation instructions or as marked on the

product.

Rear panel and connections

Volume adjustment

Cross-over / Frequency adjustment

Phase adjustment

Auto on/off. If in "AUTO" position the Subwoofer will go

into stand-by after not playing for 10 min. If you leave it

in "ON" position the Subwoofer will remain powered on.

If it stays in "OFF" position, the subwoofer will remain in

standby.

Power switch

Power cable, the power cable should be pulled from

socket if not used for a longer period

Fuse holder, if fuse needs to be replaced only use same

type and value.

IMPORTANT; remember to unplug the power cable from

mains socket before opening the fuse holder.

Right/Left and +/- speaker cable from Subwoofer to

stereo satellite speakers

Right/Left and +/- speaker cable from Amplifier/Receiver

to Subwoofer

Sound input from source or amplifier

See illustration on page 5 for explanation

SUB10