Cisco PIX 501 Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco PIX 501. Cisco PIX 501 18 pages. Data sheet
Également pour Cisco PIX 501 : Manuel de démarrage rapide (20 pages), Fiche technique (8 pages), Manuel de démarrage rapide (21 pages), Manuel de démarrage rapide (20 pages)

PDM

PDM is a web browser-based configuration tool

designed to help you set up, configure, and monitor

the PIX Firewall by use of a graphical user interface

(GUI). PDM is installed on the PIX 501 before it

ships to you.

To use PDM, make sure JavaScript and

Java are enabled in your web browser. Then use

your web browser to create a Secure HTTP

(HTTPS), encrypted and keyed, connection to the

PIX 501.

For best performance, we recommend that

you use Microsoft Internet Explorer 5.0 (Service

Pack 1) or a later release. Refer to the Cisco PIX

Device Manager Installation Guide for more

information on operating system and web browser environments supported by PDM

To load PDM:

Verify that your PC has basic connectivity to the PIX 501 on one of the inside ports (1 through

Step 1

4) using the LINK LEDs. When connectivity occurs, the LINK LEDs on both your PC and the

PIX 501 port light up solid green.

Use your web browser to create an HTTPS connection to the inside

Step 2

IP address of your PIX 501. If you are using the default configuration

and have not changed it, the inside IP address is 192.168.1.1. PDM begins to load.

Step 3

When prompted for a password, press Enter and PDM completes the loading process.