AcueLighting Extreme 650 Hybrid Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AcueLighting Extreme 650 Hybrid. AcueLighting Extreme 650 Hybrid 19 pages.

Imprimer la page

PACKAGING

This fixture is sold either in flight cases or carton boxes. Each fixture comes with the following:

6.1 ACCESSORIES

CONTENT

User Manual

Power Cable

Safety Cable

Clamps

Omega Bracket

6.2

TRANSPORT PROTECTION LOCK

In order to protect the fixture, the fixture is equipped with a pan/tilt locking mechanism. During

transport in a road case, the pan must be locked in the center position, and the fixture head must be

locked in vertical state.

6.3

PACKAGING AFTER USE

1. Before packing the fixture, make sure the fixture is allowed to cool for 20 minutes before

placing in road case.

2. Before cleaning the fixture, make sure X, Y axis protection lock is disengaged.

3. Make sure to pick up the fixture using both handles. Place the product into the flight case up

side down.

4. After packing the fixture, place the accessories into the accessory compartment, then close

and lock the flight case.

5. Flight cases should only be stacked up to two layers to prevent tipping over.

6.4

UNPACKING

Note: Before unpacking check if packaging is damaged due to transportation. If you find any physical

damage please do not use this item, and contact the dealer or manufacturer as soon as possible.

7. INSTALLATION

7.1

INSTALLATION OF RIGGING

The product can be placed on the stage or mounted on any supporting frame. The quick

locking system can quickly and easily mount in 2 directions.

7.2

RIGGING EQUIPMENT

1. Before installation, it is necessary to verify that the fixture clamp brackets are not damaged

and can bear at least 10 times the weight of the equipment. Then verify if the structure being

mounted to can bear the weight of at least 10 times the total weight of the fixture. Always use

QUANTITY