AcueLighting Extreme 150 Hybrid Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AcueLighting Extreme 150 Hybrid. AcueLighting Extreme 150 Hybrid 11 pages.

Imprimer la page
Fluids must not enter the housing as this could reduce the protective insulation and may trigger short circuits,
which may lead to a fatal electronic shock! If fluids have entered, disconnect the mains plug immediately and
secure the product against unintentional operation and contact your dealer for further instructions. Damage caused
as a result of fluids entering the housing is exempt from warranty.
No metal parts or other items must enter the housing as this may reduce the protective insulation or trigger
short circuits which may lead to fatal electric shocks. If metal parts or other items have entered, disconnect the
mains plug immediately, secure the product against unintentional operation and contact your specialized dealer!
Damage caused by metal parts or other items in the housing is exempt from warranty.
5. Operating Environment
The product must be operated and stored in a dry environment only. Splash water, rain, humidity, or fog may
reduce the protective insulation, which may lead to fatal electric shocks! The limit value for relative humidity is
50% at 45° C. A minimum distance of 1.5m to a fog machine must be observed; fog saturation in the room must
not reduce the visibility to below 10m.
The product must be operated at a temperature range of between -5 ° C and 45 ° C only. Protect the product
against direct exposure to sunlight or other heat, such as from radiators. If the product is taken from a cold
environment into a warm environment it must only be taken into operation once it has reached ambient
temperature, since the condensation created by the difference in temperature may cause damage to the luminaire.
Protect the product against dust. Dust may reduce the protective insulation, which may cause fatal electric
shocks.
The product must be operated at altitudes ranging between 20m below and 3000m above sea level only!
The product must not be operated during thunderstorms to avoid risk of damage from surge voltages!
6.

Installation

This product can be operated suspended from a ceiling or truss structure.
Should your lighting effect show any signs of damage, do not install the device. In this case, have your
lighting effect repaired by an authorized dealer. The manufacturer does not accept responsibility or liability for
damage to property or personal injury resulting from an improper installation.
As a stand-alone system the device must be installed vertically on an absolute planar, firm, shock- and
vibration-free surface. The installation of this lighting effect must be carried out by trained and professional staff.
The installation of this lighting fixture must only be carried out with the appropriate safety and hanging materials.
The suspended installation of this lighting effect necessitates a suitable suspension system. The lighting effect
must never be fixed to a swinging platform.
It is a must to install this device with a second independent fastening system (ex. Safety cable or strap). Such
second fastening system must guarantee in the event of failure of the main fastening system that no assembly parts
will fall down. The second fastening system must only be connected to the bottom of the fixture base in the proper
mounting location.
The light effect unit must be attached via two certified hooks and omega bracket when mounted to truss. Use
of properly weight rated mounting options must be used when mounting to other surfaces• Use the screw threads
on the under-surface of brackets only.
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT
CIRCUIT!
ATTENTION：
DANGER OF LIFE!
4