Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) Manuel d'installation et de configuration - Page 33
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} Cisco Versatile Interface Processor (VIP6-80) (VIP6-80). Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) 40 pages. Versatile interface processor
Imprimer la page
In the output display of the show diag command (see
Note
Memory Size shows the amount of memory installed on the VIP6-80. Make a note of these memory
values, then compare them after you upgrade memory to verify the upgrade.
The following Cisco Systems memory spare and upgrade kits are compatible with the VIP6-80:
Table 7
Product
MEM-VIP6-64M-SD(=)
MEM-VIP6-128M-SD(=)
MEM-VIP6-256M-SD(=)
Depending on your system configuration, a memory upgrade might be required. Also, if a system
problem is determined to be caused by a DIMM, a DIMM replacement might be required.
Figure 1
Handle the DIMM by the card edges only, and avoid touching the memory module, pins, or traces (the
Caution
metal fingers along the connector edge of the DIMM). (See
Figure 8
Use only SDRAM DIMMs from Cisco Systems. A Cisco manufacturing part number appears on each
Note
SDRAM DIMM.
OL-5078-01
Memory Spare and Upgrade Kits
Description
Memory spare option for VIP6-80 CPU memory
Upgrades VIP6-80 CPU memory from 64 to 128 MB, with one
128-MB SDRAM DIMM
Upgrades VIP6-80 CPU memory from 64 to 256 MB, or from
128 MB to 256 MB, with one 256-MB SDRAM DIMM (This
256-MB memory option is for CPU memory only.)
shows the locations of the CPU memory and packet memory SDRAM DIMMs on the VIP6-80.
Handling the DIMM
Versatile Interface Processor (VIP6-80) Installation and Configuration Guide
page
30), the line that begins with Controller
Figure
8.)
SDRAM DIMM
or packet memory
33