Epson 2480 - Perfection Photo Manuel d'information sur les produits - Page 4

Epson Perfection 2480 Photo

3. Place the film holder in the correct position for your film or

slides. For slides, place the holder on the scanner first, then

place the slides in the holder. Match the letter on the film

holder tab with the corresponding letter on the scanner.

Position A Negatives

Scans the first 3 frames of the film strip in the 1, 2, and 3 spots

on the holder.

Position B Negatives

Scans the last 3 frames of the film strip in the 4, 5, and 6 spots

on the holder.

Position C Slides

Place the holder on the scanner glass, then put the slides in

the holder. Place the top of the image toward the top of the

scanner.

Note: Make sure the thin, rectangular calibration windows on

both ends of the film holder are uncovered to ensure an accurate

scan.

4. Close the scanner cover.

4 - Epson Perfection 2480 Photo

6/04

5. To scan each film frame or slide as a separate image, press

the 4 Scan and Save button or open EPSON Smart Panel

and select

Scan and Save

using ideal settings in Full Auto Mode and opens each one

separately in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart

Panel help for instructions on selecting scan modes and

complete scanning details.

6. When you're finished scanning, you can store the film

holder in the scanner cover. Slide the film holder into the

cover, then replace the document mat.

. This scans each frame or slide