Epson 3590 - Perfection Photo Manuel de l'utilisateur - Page 4

Epson Perfection 3590 Photo

Scanning Film and Slides

The top of the Perfection 3590 Photo scanner cover has an

automatic film loader that lets you load 35 mm negatives

without even opening the cover. You can use the slide holder to

scan a 35 mm slide from the scanner glass.

Before scanning negatives or a slide, lift the scanner cover all the

way up and slide the reflective document mat up and off of the

scanner cover.

Note: Make sure the cover cable is connected to the back

of the scanner.

Scanning 35 mm Negatives

1. Close the scanner cover.

2. Press and release the back of the auto film loader cover to

open it.

3. Flip out the metal film guide and press it down until it

clicks into place.

4 - Epson Perfection 3590 Photo

Caution: Before loading a film strip, make sure it contains at

least 2 photos, but no more than 6. Don't load folded, creased,

curled, or sticky film into the auto film loader or it may damage

the film or your scanner.

4. Place the film strip in the film loader with the shiny base

side facing down. Your images and any wording on the film

strip should appear backward on the side that faces up.

5. Slowly slide the film into the loader. Let go of the film when

the scanner begins to automatically feed it into position.

6. When you finish scanning the film strip, press the

button inside the auto film loader to eject the film. Wait for

the ] Start light to stay on green, then remove the film

strip.

Caution: Don't turn off the scanner with a film strip loaded in the

auto film loader. Never pull film out of the loader by force.

7. Flip the film guide back inside the auto film loader and

press it down until it clicks into place.

8. Close the auto film loader cover.

6/05

Eject