Cisco 2500 Series Manuel de démarrage - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 2500 Series. Cisco 2500 Series 47 pages. Wireless controller
Également pour Cisco 2500 Series : Manuel d'installation (12 pages), Manuel de configuration (19 pages), Manuel de déploiement (23 pages), Manuel de configuration (50 pages)

Imprimer la page

Using the Startup Wizard

Before you can use the startup wizard, you must obtain the information discussed in the

and Information" section on page

configure your controller for basic operation.

Note

The available options appear in brackets after each configuration parameter. The default value appears

in all uppercase letters.

If you enter an incorrect response, the controller provides you with an appropriate error message such

Note

as invalid response, and returns to the wizard prompt.

Press the hyphen key if you need to return to the previous command line.

Note

Table 3

Wizard Setting

System Name

Administrative user name

Administrative password

Management Interface IP Address

Management Interface Netmask

Management Interface Default Router

The startup wizard runs the first time that you power on the controller. The second time you

Note

power it on, the controller prompts you for a login ID and password.

Startup Wizard Information

Running the Bootup Script and Power-On Self Test

Table 3

contains startup wizard information you can use to

Action

Enter the system name, which is the name you want to assign

to the controller. You can enter up to 31 ASCII characters.

Enter the administrative user name to be assigned to this

controller. You can enter up to 24 ASCII characters for each.

The default administrative username is admin.

Enter the administrative password to be assigned to this

controller. You can enter from 3 to 24 ASCII characters for

each.

There is no default administrative password, you must

Note

enter a password.

Enter the IP address of the management interface.

The management interface is the default interface for in-band

management of the controller and connectivity to enterprise

services such as AAA servers.

You can access the controller GUI interface using the

management interface IP address.

Enter the IP address of the management interface netmask.

Enter the IP address of the default router.

Cisco 2500 Series Wireless Controller Getting Started Guide

"Required Tools