Epson 4490 - Perfection Photo Manuel d'information sur les produits - Page 4

Epson Perfection 4490 Photo

Scanning a Document or Photo

1. Open the scanner cover.

Make sure the document mat is installed inside the cover. If

it is not installed, see "Replacing the Document Mat" on

page 7 for instructions.

2. Place your document or photo on the document table, face

down on the glass. Make sure the top of the document or

photo is against the upper right corner of the document

table.

3. If you are scanning multiple photos at once, position each

photo at least 20 mm (0.8 inches) apart from the others.

Note: If you are scanning large or thick documents, you can

remove the scanner cover.

4 - Epson Perfection 4490 Photo

4. Close the scanner cover gently so that your original does not

move.

Note: Always keep the document table clean.

Do not leave photos on the document table for an extended

period of time as they may stick to the glass.

Scanning Film and Slides

To scan film strips or slides, you need to remove the document

mat from the scanner cover. This uncovers the transparency

unit so your scanner can use it to scan your film or slides.

1. Make sure the cover cable is connected to the scanner's

port.

OPTION

Note:

Before connecting or disconnecting the cover cable, turn off the

scanner using its power switch.

4/05