Text Part Number:
78-1897-02
Cisco 7513 and Cisco 7576
Chassis Replacement and Upgrade
Instructions
Product Numbers: CHAS-7513-DC=, CHAS-7513-AC=, MAS-7513= (Cisco 7513)
CHAS-7576-DC=, CHAS-7576-AC=, MAS-7576=, and UPG-7513/7576= (Cisco 7576)
Customer Order Number: DOC-781897=
This publication provides instructions for replacing a Cisco 7513 or Cisco 7576 chassis, which is
available as a spare part. It also includes instructions on upgrading a Cisco 7513 to a Cisco 7576.
Note
Also, the term RSP is used to refer to the RSP2 and RSP4 Route Switch Processors that are
compatible with the Cisco 7513 and Cisco 7576.
The chassis is available as a spare part and as a kit to upgrade a Cisco 7513 to a Cisco 7576. The
chassis includes all of the components required for operation except the processor modules and
power supplies (MAS-7513=), (MAS-7576=), as a spare with power supplies (CHAS-7513-DC=,
CHAS-7576-DC=, CHAS-7513-AC=, CHAS-7576-AC=), and as a kit to upgrade the Cisco 7513 to
a Cisco 7576 (UPG-7513/7576=). After you replace the chassis, you must move the processor
modules from your old chassis into your new chassis.
Note
Refer to the "Upgrading a Cisco 7513 to a Cisco 7576" section on page 5 for more information. In
addition, the replacement chassis and the upgrade kit do not include the cable-management bracket
or rack-mounting hardware kits. You can move the rack-mounting hardware and cable-management
bracket from the existing chassis, or order either kit as a spare part.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1996-1998
Cisco Systems, Inc.
All rights reserved.
In this document, the term chassis is used to refer to the Cisco 7513 or Cisco 7576 chassis.
The Cisco 7576 Upgrade Kit does not contain RSPs, interface processors, or power supplies.
1
Imprimer la page