Cisco AS5300 - Universal Access Server Manuel de configuration - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 46 pages. Access server
Également pour Cisco AS5300 - Universal Access Server : Annexe (10 pages), Manuel de démarrage rapide (25 pages), Manuel (21 pages)
Task 2—Setting Up Asynchronous Shell Services
Enter the show running command to view the current configuration of the FastEthernet 100BaseT
Step 4
interface:
Tips
If you have trouble:
•
•
•
Step 2—Configuring the T1 Controllers
Configure the Cisco AS5300's T1 controllers to allow calls to come into the NAS from the public
switched telephone network (PSTN) cloud. You must specify the following information for each
controller:
•
•
•
•
To configure the controllers, enter the following commands beginning in global configuration mode:
Enter your telephone company's switch type. This example uses primary national ISDN 1.
Step 1
hq-sanjose(config)# isdn switch-type primary-ni
Cisco IOS Dial Services Quick Configuration Guide
2-10
0 watchdog, 0 multicast
0 input packets with dribble condition detected
176 packets output, 16936 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
hq-sanjose# show running
Building configuration...
Current configuration:
!
----- snip ----
!
interface FastEthernet0
ip address 10.1.1.10 255.255.255.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
duplex auto
speed auto
!
----- snip ----
Make sure the cable connections are not loose or disconnected.
Make sure you are using the correct IP address.
An auto-configuration of the Fast Ethernet interface may not work as expected if the Cisco device
is connected to a third-party switch. Using the step-by-step configuration described above may be
a good work-around if you have problems getting the interface to work.
Framing type
Line code type
Clock source
Timeslot assignments
Chapter 2
Configuring the Cisco AS5300 Network Access Server