Epson ActionLaser 1500 Manuel de configuration - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson ActionLaser 1500. Epson ActionLaser 1500 18 pages. Imaging cartridge replacement procedure
Également pour Epson ActionLaser 1500 : Papier et livraison de papier (11 pages), Manuel d'installation (7 pages), Bulletin d'information sur les produits (8 pages), Spécification du produit (1 pages)

7. Next you reset the TONER setting. Three messages flash in

rotation on the display:

NEW CARTRIDGE?

YES, PRESS RESET

NO, PRESS CONTINUE.

8. Press RESET to change the TONER setting to full.

9. Gently press down on the printer cover until it clicks shut.

Please note: If you replace the cartridge when more than 20%

toner is left, the three rotating messages do not appear. Instead

COVER OPEN E**

SelecType Level 2 TONER option to change the TONER setting

to full.

If you do not change the TONER setting to full after replacing

the imaging cartridge, the TONER message indicates the wrong

amount of toner left.

the toner level is full.

Note:

Each time you replace the imaging cartridge, you should print a

feature print to be sure the print quality is satisfactory and that you

installed the cartridge properly. See "Test printing" earlier in this

guide.

14 Maintenance

or more asterisks) appears. Use the

F (two

Also NEW CARTRIDGE?

appears even if