Cisco Nexus 7000 Series Manuel d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 16 pages. Switch chassis
Également pour Cisco Nexus 7000 Series : Manuel de référence (2 pages), Manuel d'instructions d'installation (39 pages), Référence (34 pages), Manuel d'installation (18 pages), Configuration (8 pages), Manuel de configuration (28 pages), Manuel de démarrage rapide (10 pages), Manuel de démarrage rapide (29 pages), Manuel d'instructions de remplacement (14 pages), Manuel d'instructions de remplacement (21 pages), Manuel de dépannage (10 pages)

Installing Cable Management Frames onto the Chassis

Step 1

Attach the two cable management frames to the chassis as follows:

a) Position one of the cable management side frame assemblies on the vertical mounting bracket attached to one side

of the front of the chassis.

b) Secure the cable management frame with two M4 screws. (see the following figure).

•

Figure 6: Attaching a Cable Management Assembly to the Chassis

Cable management side frame

Cable management bottom hood frame

c) Repeat Steps 1a through 1b to attach the other cable management frame.

d) Place the top and bottom hood frame as shown in the figure. Secure the hood frames with four M3 screws.

Step 2

Attach the side filter to the cable management assembly as follows:

a) Remove 4 M3 screws as shown in the figure.

Installing the Switch Chassis

Two M4 screws to secure the cable management

frame to front mounting bracket on chassis.

Four M3 screws to secure top and bottom hood

frames to the chassis.

Installing the Switch Chassis