B2 Audio M1 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} B2 Audio M1. B2 Audio M1 10 pages.

Imprimer la page

2. Panel layout

INPUT

Signal input from the head unit. A minimum level

input of 0.2V is essential for correct operation.

OUTPUT

Output RCA for signal routing to another amplifier.

POWER & PROTECTION INDICATOR

Power LED, Blue-lit shows correct operation.

Protect LED, Red-lit shows general malfunction,

faulty connection or thermal protection.

GAIN (6V ~ 0.2V)

Matching of the output voltage from the head unit's

RCA line-outs to the input section.

SUBSONIC FILTER (10Hz ~ 50Hz @ 24dB/Oct)

Adjusts the subsonic cut off point to eliminate

frequencies within the filter's range.

Power connetors

GND ( GROUND CONNECTION )

For connection to the chassis' ground.

For optimum performance 0 gauge cable is

recommended.

+12V ( POWER CONNECTION )

For connection to the positive terminal of the

battery (+12). For optimum performance

0 gauge cable is recommended.

BASS BOOST

Variable bass boost with 0-9 dB @ 45 Hz.

REMOTE LEVEL CONTROL PORT

Connection of external level control.

(The

Better Bass Remote

can be connected for additional features).

LOW PASS FILTER (35Hz ~ 250Hz @ 24dB/Oct)

Adjusts the cut off point for the low pass filter

within the filter's range.

PHASE CONTROL

Variable phase adjustment from 0-180 degrees.

OUTPUT MASTER / INPUT SLAVE

For daisy chain connection of 2 amplifiers.

Minimum impedance is 2

REM ( REMOTE )

Connect to switched +12V with trigger from head unit.

SPEAKER OUTPUTS

The ampli er' s connection to the loudspeakers.

Minimum speaker cable is 12 gauge.

The minimum impedance is 1 ohm if used as

a single unit.

In linked mode the M1 o ers stable opearation to a

minimum of 2 ohms.