Cisco SNS-3495 series Manuel d'installation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco SNS-3495 series. Cisco SNS-3495 series 19 pages. Sns-3400 series
Également pour Cisco SNS-3495 series : Manuel d'installation (36 pages), Manuel de dépannage (8 pages)
Imprimer la page
Connecting and Powering On the Cisco SNS-3415/3495 Appliance
Use the arrow keys to select the BIOS menu page.
Step 2
Highlight the field to be modified by using the arrow keys.
Step 3
Press Enter to select the field that you want to change, and then modify the value in the field.
Step 4
Press the right arrow key until the Exit menu screen is displayed.
Step 5
Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press
Step 6
F10). You can exit without saving changes by pressing Esc.
Service Headers and Jumpers
This section includes the following topics:
•
•
•
Header Locations on the Motherboard
See
view. The pin numbering is the same for all headers in the block.
Installation and Upgrade Guide for Cisco Secure Access Control System 5.6
8-14
Header Locations on the Motherboard, page 8-14
Using the BIOS Recovery Header J41, page 8-15
Using the Clear CMOS Header J37, page 8-17
Figure
8-5. The block of headers is shown in red. The individual headers are shown in the magnified
Chapter 8
Installing the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances