Epson ES-1200C Pro PC Bulletin d'information sur les produits - Page 4
Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson ES-1200C Pro PC. Epson ES-1200C Pro PC 19 pages. Product support bulletin(s)
Également pour Epson ES-1200C Pro PC : Manuel de l'utilisateur (11 pages), Manuel de démarrage (31 pages), Manuel (11 pages), Commencer (17 pages), Bulletin d'information sur les produits (5 pages)
Imprimer la page
15. Click on SAVE.
16. Close the SETTINGS notebook.
The next time a Win-OS/2 session is started, you will see the EPSON device driver
load. If you do not, repeat the above steps. If you have migrated a Windows
application to the OS/2 desktop, apply the above steps to that icon instead of the
Win-OS/2 icon. To verify that the configuration is correct, configure the DOS FULL
SCREEN icon using the same methods outlined in steps 6 through 16. Once you
have completed those steps, start a DOS FULL SCREEN session and run the
SCANTEST utility from the \WlNDOWS\TWAIN directory. If SCANTEST runs
successfully, chances are that the Windows session will run properly.
Epson TWAIN v2.xx
There is no special procedure required to setup this version of the driver to run in a
Windows session under OS/2 Warp. Simply launch Windows and install the driver.
Follow the procedures outlined in the user's manual. If the driver does not install
properly, verify that the device drivers mentioned earlier in this section are being
executed.
PSB No: P-0103A
Page: 4 of 4