Cisco UCS B200 M3 Note d'installation et d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B200 M3. Cisco UCS B200 M3 37 pages. Blade server
Également pour Cisco UCS B200 M3 : Manuel d'installation (34 pages), Note d'installation et d'entretien (36 pages), Manuel (8 pages), Manuel de mise à jour (21 pages), Note d'installation et d'entretien (28 pages)
Imprimer la page
Table 1: Blade Server LEDs
LED
Power
Link
Health
Beaconing
Activity
(Disk Drive)
Color
Description
Off
Power off.
Green
Main power state. Power is supplied to all server components in
normal operation.
Amber
Standby power state. Power is supplied only to the service processor
(BMC) of the server so that the server can still be managed.
Note
Off
None of the network links are up.
Green
At least one network link is up.
Off
Power off.
Green
Normal operation.
Amber
Minor error.
Blinking Amber
Critical error.
Off
Beaconing not enabled.
Blinking blue 1 Hz
Beaconing to locate a selected blade—If the LED is not blinking,
the blade is not selected. You can initiate beaconing in UCS Manager
or by using the Locator button.
Off
Inactive.
Green
Outstanding I/O to disk drive.
Flashing Amber
Rebuild in progress. Health LED will flash in unison.
4 Hz
Flashing Amber
Identify drive active.
4 hz
If you press and release the front-panel power button, the
server performs an orderly shutdown of the 12 V main
power and goes to standby power state. You cannot shut
down standby power from the front-panel power button.
See the Cisco UCS Manager Configuration Guide for your
release for information about completely powering off the
server from the software interface.
3