Cisco UCS B250 M2 Note d'installation et d'entretien - Page 10
Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B250 M2. Cisco UCS B250 M2 34 pages. Extended memory blade server
Installing and Removing a Blade Server Hard Drive
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Table 2
Table 2
Supported Hard Disk Drives (HDD)
Product ID
A03-D073GC2
A03-D146GA2
A03-D146GC2
A03-D300GA2
A03-D100SSD
A03-D600GA2
A03-D500GC3
UCS-SSD100GI1F104
A03-D1TBSATA
UCS-HDD300GI2F105
UCS-HDD900GI2F106
1. The built-in 1064E RAID controller runs at 1.5Gb Link Speed instead of 3Gb with 6Gb Local Disks when running UCS 1.4(2) and earlier software
releases.
2. This drive requires UCS capability catalog version 1.0.50.T or 2.0.1nT or later.
3. This drive requires UCS capability catalog version 1.0.54.T or 2.0.1pT or later.
Removing a Blade Server Hard Drive
To remove a hard drive from a blade server, follow these steps:
Push the button to release the ejector, and then pull the hard drive from its slot.
Step 1
Place the hard drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in
Step 2
another blade server.
Install a blank faceplate (N20-BBLKD) to keep dust out of the blade server if the slot will remain empty.
Step 3
Cisco UCS B250 Extended Memory Blade Server Installation and Service Note
10
shows the drives supported in this blade server.
Description
73 GB 6Gb SAS transfer rate
146 GB 6Gb SAS transfer rate
146 GB 6Gb SAS transfer rate
300 GB, 6Gb SAS transfer rate
100 GB SATA SSD HDD/hot plug/drive sled mounted (no longer sold)
600 GB, 6Gb SAS transfer rate
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted
100 GB Low-Height 7mm SATA SSD hot plug/drive sled mounted
1 TB SATA 7.2K RPM SFF HDD /hot plug/drive sled mounted
300GB 6Gb SAS 15K RPM SFF HDD/hot plug/drive sled mounted
900GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted
1
, 15K RPM HDD/hot plug/drive sled mounted
1
, 10K RPM SFF HDD/hot plug/drive sled mounted
1
, 10K RPM SFF HDD/hot plug/drive sled mounted
1
, 15K RPM HDD/hot plug/drive sled mounted
1
, 10K RPM HDD/hot plug/drive sled mounted
2
3
OL-22474-03