Cisco UCS B260 M4 Note d'installation et d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B260 M4. Cisco UCS B260 M4 46 pages. Blade server
Également pour Cisco UCS B260 M4 : Note d'installation et d'entretien (50 pages)
Imprimer la page
Overview
Table 3: Blade Server LEDs
LED
Power
Link
Health
Blue locator button and LED
Activity
(Disk Drive)
Color
Off
Green
Amber
Off
Green
Off
Green
Amber
Blinking Amber
Off
Blinking blue 1
Hz
Off
Green
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs
Description
Power off.
Main power state. Power is supplied to all server
components and the server is operating normally.
Standby power state. Power is supplied only to the service
processor of the server so that the server can still be
managed.
The front-panel power button is disabled by
Note
default. It can be re-enabled through Cisco UCS
Manager. After it's enabled, if you press and
release the front-panel power button, the server
performs an orderly shutdown of the 12 V main
power and goes to standby power state. You
cannot shut down standby power from the
front-panel power button. See the Cisco UCS
Manager Configuration Guides for information
about completely powering off the server from
the software interface.
None of the network links are up.
At least one network link is up.
Power off.
Normal operation.
Minor error.
Critical error.
Blinking is not enabled.
Blinking to locate a selected blade—If the LED is not
blinking, the blade is not selected. You can control the
blinking in UCS Manager or by using the blue locator
button/LED.
Inactive.
Outstanding I/O to disk drive.
LEDs
5