Cisco UCS B420 M3 Manuel de mise à jour - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de mise à jour pour {nom_de_la_catégorie} Cisco UCS B420 M3. Cisco UCS B420 M3 8 pages. High performance blade server
Également pour Cisco UCS B420 M3 : Note d'installation et d'entretien (38 pages)
Imprimer la page
Cisco UCS Blade Server
Use the GUI or CLI procedures in the
Sample Board Controller Activation Command Sequence
The following is an example of the commands with sample values.
Box-A# scope server 1/4
Box-A /chassis/server # scope boardcontroller
Box-A /chassis/server/boardcontroller # show image
Name
--------------------------------------------- -------------------- -------
ucs-b420-m3-brdprog.3.0.gbin
ucs-b420-m3-brdprog.8.0.gbin
Box-A /chassis/server/boardcontroller # activate firmware 8.0 force
Warning: When committed this command will reset the end-point
Box-A /chassis/server/boardcontroller* # commit-buffer
Note
The server automatically reboots after the
Box-A /chassis/server/boardcontroller # show version
BoardController:
Box-A /chassis/server/boardcontroller # show version
BoardController:
When the
Note
incomplete. When the command returns
takes a few minutes.
Cisco UCS B420 M3 Server Upgrade Guide for Intel E5-4600 v2 Series CPUs
8
Running-Vers: 8.0
Package-Vers:
Activate-Status: Activating
Running-Vers: 8.0
Package-Vers:
Activate-Status: Ready
command returns
show version
UCS Manager Install and Upgrade Guides.
Type
Board Controller
Board Controller 8.0
command is executed.
commit-buffer
Activate-Status: Activating
Activate-Status: Ready
Version
3.0
, the process is working, but
, the process is complete. The process
OL-28629-01