Cisco UCS B420 M4 Note d'installation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B420 M4. Cisco UCS B420 M4 38 pages. Blade server
Imprimer la page
Installing a Blade Server
Cisco UCS Manager automatically reacknowledges, reassociates, and recommissions the server, provided
any hardware changes are allowed by the service profile.
Server Configuration
Cisco UCS blade servers should be configured and managed using Cisco UCS Manager. For details, see the
Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides are
available at the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Powering Off the Blade Server
Use Cisco UCS Manager to shut down the server. For detailed steps on how to perform this operation, see
the Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides
are available at the following URL:
configuration_guides_list.html
Removing a Blade Server
You must decommission the server using Cisco UCS Manager before physically removing the blade server.
Procedure
Step 1
Turn off the blade server using either Cisco UCS Manager.
Step 2
Completely loosen the captive screws on the front of the blade.
Step 3
Remove the blade from the chassis by pulling the ejector levers on the blade until it unseats the blade server.
Step 4
Slide the blade part of the way out of the chassis, and place your other hand under the blade to support its
weight.
Step 5
Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately reinstalling
it.
Step 6
If the blade server slot is to remain empty, reinstall the slot divider and install two blade server blanking panels
to maintain proper thermal temperatures and to keep dust out of the chassis.
Server Troubleshooting
For general troubleshooting information, see the
http://www.cisco.com/en/US/products/ps10281/products_installation_and_
Cisco UCS Manager Troubleshooting Reference
Cisco UCS B420 M4 Blade Server Installation and Service Note
Server Configuration
Guide.
9