Cisco UCS B460 M4 Note d'installation et d'entretien - Page 43

Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B460 M4. Cisco UCS B460 M4 46 pages. Blade server
Également pour Cisco UCS B460 M4 : Fiche technique (7 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (5 pages), Note d'installation et d'entretien (50 pages)

Upgrading to a Cisco UCS B460 M4 Blade Server

Procedure

Step 1

Open the ejector levers on the front of the UCS Scalability Connector. See callout 1 in the following figure.

Step 2

While holding the ejector levers open, line up the four guide posts with the holes on the bracket and push the

UCS Scalability Connector into place until it engages. See callout 2.

Step 3

Close the ejector levers.

Step 4

Tighten the captive screws on the front of the UCS Scalability Connector. See callout 3.

Step 5

Use Cisco UCS Manager to power on the blade server and reconfigure it.

Figure 26: Installing the UCS Scalability Connector

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

Installing a Scalability Connector