Cisco UCS C200 Mise en place
Parcourez en ligne ou téléchargez le pdf Mise en place pour {nom_de_la_catégorie} Cisco UCS C200. Cisco UCS C200 10 pages.
Imprimer la page
Set up CIMC for UCS C−Series Server
Document ID: 111455
Contents
Introduction
Prerequisites
Requirements
Components Used
Introduction
This support document provides an overview for the steps required to set up CIMC network connectivity for
the UCS C−Series server.
Prerequisites
Requirements
Cisco recommends that you:
•
Have a working knowledge of the Cisco UCS C−Series Server Blade hardware and software
administration.
•
Be familiar with UCS C−Series Servers Cisco Integrated Management Controller
•
Understand the impact and implications of the different commands described in this document.
•
Be familiar with the UCS C−Series components and topology.
Components Used
The information in this document is based on Cisco UCS C−Series Servers.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.