Epson Expression 10000XL Series Spécifications - Page 4

Imprimer la page

Epson Expression 10000XL

Transporting the Scanner and TPU

Lock the scanner's transportation lock before transporting it or

storing it for an extended time.

1. Turn on the scanner and wait about 30 seconds for it to

initialize. When the

Ready

on, turn the scanner off.

2. Unplug the AC power cord, and then push down the

transportation lock on the back of the scanner to the

position.

3. Place the scanner in its original box, or use equivalent

packing materials.

Transporting the TPU

Before shipping or storing the transparency unit (TPU), follow

these steps:

1. Use a coin to turn the transportation lock to the

position.

2. Disconnect the TPU cable from the

back of the scanner.

3. Remove the TPU from the scanner and place it in its

original box, or use equivalent packing materials.

4 - Epson Expression 10000XL

light stops blinking and remains

Lock

port on the

OPTION

Cleaning the Scanner

Follow these steps to clean the scanner.

1. Press the . power button to turn the scanner off, and

unplug the power cord.

Caution: Always unplug the scanner before cleaning.

2. Use a soft, damp cloth and mild detergent to clean the outer

case.

Caution: Be careful not to spill liquid or let water get into the

scanner mechanism or electronic components. This could

permanently damage them.

Never use alcohol, thinner, or corrosive solvent to clean the

scanner. These chemicals can damage the scanner

components as well as the case.

3. Clean dust and smudges from the document table glass with

a soft, dry cloth (a microfiber glass cleaning cloth is

recommended). You can also use compressed air spray

cleaner.

To remove grease, use pretreated lens or scanner wipes, or a

small amount of glass cleaner on a soft cloth. Dry the

document table glass afterwards.

Caution: Never spray glass cleaner directly on the document

table. Always spray it on a cloth first and then wipe the

glass.

Never use a harsh or abrasive brush or cleaning product to

clean the document table. A damaged glass surface can

decrease the scanning quality.

Avoid leaving photos on the scanner glass for an extended

period of time, or residue from the photos may adhere to the

glass.

5/04