Cisco UCS E Series Manuel de dépannage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Cisco UCS E Series. Cisco UCS E Series 28 pages. Ucs e series unified computing system
Également pour Cisco UCS E Series : Aperçu du produit (8 pages), Manuel d'installation (46 pages)

Imprimer la page

Microsoft Windows Installation Troubleshooting

VMware Boots After Microsoft Windows Installation

This problem occurs if you had first installed VMware, and then installed Microsoft Windows. To resolve

this problem, do the following:

1 Change the state of the physical drive to JBOD. See the "Changing the Physical Drive State" section in

the configuration guides for the version of the CIMC that you are using.

2 Configure RAID to clear partitions. See the "Configuring RAID Using the CIMC GUI" section in the

configuration guides for the version of the CIMC that you are using.

The configuration guides are available at:

ucs-e-series-servers/products-installation-and-configuration-guides-list.html.

Microsoft Windows Installation Displays VMware Partitions

During the Microsoft Windows installation, the "Where do you want to install Windows" dialog box appears

(see figure below, which displays partitions that were previously created by VMware. This dialog box also

displays the following warning message:

Warning: Windows Cannot be Installed to Disk x

Partition x

To resolve this problem, clear the old partitions by clicking Drive options (advanced), and then resume with

the Microsoft Windows installation.

Figure 3: Where Do You Want to Install Windows Dialog Box

Host Login and CIMC Login Troubleshooting

Cannot Session into the E-Series Server (Host)

The ucse slot session host command does not allow you to log into the E-Series Server. To resolve this

problem, do the following:

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

http://www.cisco.com/c/en/us/support/servers-unified-computing/

Overview