Argos Atlas 152/6033 Manuel d'instructions de montage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Argos Atlas 152/6033. Argos Atlas 152/6033 12 pages. Single robe carcass

Imprimer la page

Argos Atlas 152/6033 Manuel d'instructions de montage

Assembly Instructions

Step 3

Prepare the right end

Refer to step 1 and, if

you have chosen to fit 1

hanging rail or, an

internal chest or, a

shelf pack, screw 2

metal dowels

into the

right end

Note: Tighten the metal

dowels up fully against

the panels.

To fit the rail holder

screw through its top

hole with screw

into the shallow mark

hole drilled in the right

end

. Make sure that

it is fitted straight, in line

with the panel edges and

then fit another screw

using the lower hole.

Step 4

Prepare the left end

Refer to step 1 and, if

you have chosen to fit 2

hanging rails, screw 2

metal dowels

into the

left end

Note: Tighten the metal

dowels up fully against

the panels.

To fit the 2 rail holders

screw through the top

hole with screw

into the shallow mark

hole drilled in the left end

. Make sure that they

are fitted straight, in line

with the panel edges and

then fit another screw

using the lower hole.

1 hanging rail or, an internal chest or, a shelf pack.

If you are fitting 2 hanging rails, follow Step 4 and 5.

Note: If you have purchased a shelf pack,

and

Only follow Steps 4 and 5 if you are fitting 2 hanging rails.

and

Only follow Steps 2 and 3 if you are only fitting

do not fit the rail holder.

If you are just fitting 1 rail, follow Step 2 and 3.

Finished

front edge

Finished

front edge