Cisco 2650XM Fiche technique - Page 2
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco 2650XM. Cisco 2650XM 11 pages. Gateway - pbx interoperability: lucent definity g3r pbx using analog fxo interfaces to an h.323 gateway
Également pour Cisco 2650XM : Note d'application (9 pages)
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Protocol Specifications and Compliance
Figure 1 shows the basic protocol architecture of a Cisco IP Transfer Point and its any-to-any
switching capability.
Figure 1.
Cisco IP Transfer Point Protocol Architecture
Cisco IP Transfer Point Architecture
AAL5 – ATM Adaptation Layer 5
●
GTT – Global Title Translation
●
MAP – Mobile Application Part
●
MTP – Message Transfer Part
●
MTP1 – Message Transfer Part Layer 1
●
MTP2 – Message Transfer Part Layer 2
●
MTP3 – Message Transfer Part Layer 3
●
M2PA – MTP2-User Peer-to-Peer Adaptation Layer
●
M3UA – MTP3-User Adaptation Layer
●
SCCP – Signaling Connection Control Part
●
SSCOP – Service-Specific Connection-Oriented Protocol
●
SCTP – Stream Control Transmission Protocol
●
SSCF-NNI – Service-Specific Coordination Function for Network Node Interface
●
SUA – SCCP User Adaptation Layer
●
TCAP – Transaction Capabilities Application Part
●
Tables 1 through 8 provide more information about the Cisco ITP. Specifically:
Table 1 describes protocol compliance
●
Table 2 outlines the general platform specifications
●
Table 3 describes SS7 interface support
●
Table 4 details the Cisco ITP capacity and performance
●
Table 5 describes Cisco ITP SS7oIP features
●
Table 6 lists the IP routing protocols supported
●
Table 7 describes Cisco IOS
●
®
Software QoS features
Data Sheet
Page 2 of 11