Cisco 2800 Series Manuel de démarrage rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 2800 Series. Cisco 2800 Series 45 pages. Cisco ios software configuration
Également pour Cisco 2800 Series : Manuel de démarrage rapide (13 pages), Fiche technique (8 pages), Manuel de démarrage rapide (47 pages), Note d'application (41 pages), Configuration (10 pages), Vue d'ensemble (27 pages), Fiche technique (5 pages), Fiche technique (20 pages), Configuration (32 pages)

Cisco 2800 Series Manuel de démarrage rapide
You can mount the router in the following ways:
• Center mounting—Brackets attached in the center of the chassis with only the front panel facing forward
• Front mounting—Brackets attached at the front of the chassis with the front panel facing forward
• Rear mounting—Brackets attached at the rear of the chassis with the rear panel facing forward
The brackets are shown in Figure 4, Figure 5, and Figure 6.
Figure 4
Brackets for Rack-Mounting of Cisco 2801 Routers
Figure 5
Brackets for Rack-Mounting of Cisco 2811 Routers
Bracket pair for 19-inch rack
Figure 6
Brackets for Rack-Mounting of Cisco 2821 and Cisco 2851 Routers
Bracket pair for 19-inch rack
Attaching Brackets to the Router for Rack-Mounting
Attach the mounting brackets to the router chassis as shown in Figure 7 through Figure 9, using the screws provided.
Caution
Do not overtorque the screws. The recommended torque is 15–18 in-lb (1.7–2.0 N-m).
Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to install the bracket screws.
Caution
Your chassis installation must allow unrestricted airflow for chassis cooling.
Bracket pair for 23-inch rack
Bracket pair for 23-inch rack
13