Cisco ASR 5000 Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco ASR 5000. Cisco ASR 5000 18 pages. Applying power and verifying the installation
Également pour Cisco ASR 5000 : Manuel d'installation (33 pages), Procédure d'installation (8 pages), Manuel d'installation (37 pages)

Imprimer la page

Reducing the Weight of the Chassis Prior to Installation

a) Unsnap the plastic bezel from the lower-front of the chassis by placing your fingers in the notches on the sides of the

bezel and pulling it toward you. Place it to the side for re-installation later.

b) Use a Phillips #1 screwdriver to loosen the four captive screws that hold the fan tray cover/EMI shield in place. Pull

the cover away from the chassis. Do NOT use an electric or pneumatic torque driver to loosen these screws.

c) Pull the fan tray toward you using the handle. The fan tray should easily slide out of the chassis. Place it to the side

for re-installation later.

To avoid personal injury and/or damage to the fan tray, be sure to support the fan tray's weight from its front and

back as you slide it completely out of the chassis.

Vorsicht beim Herausziehen der Luefter-Schublade: um eine Beschaedigung des Moduls und eventuelle Verletzungen

zu vermeiden, sollte diese hinten und vorne unterstuetzt werden.

Step 3

Remove the PFUs located in the lower-rear of the chassis.

ASR 5000 Installation Guide

Chassis Installation