Cisco ASR 9000 Series Manuel de configuration
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 pages. Line card
Également pour Cisco ASR 9000 Series : Configuration des paramètres du réseau (26 pages), Manuel de configuration (46 pages), Manuel (24 pages), Configuration (46 pages), Manuel (44 pages), Manuel de référence rapide (7 pages)
Imprimer la page
Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router
This module describes the configuration of serial interfaces on the Cisco ASR 9000 Series Router.
Before you configure a serial interface, you must configure the clear channel T3/E3 controller or
channelized T1/E1controller (DS0 channel) that is associated with that interface.
Feature History for Configuring Serial Controller Interfaces
Release
Release 3.3.0
Release 3.4.0
OL-26061-03
Modification
This feature was introduced on the Cisco XR 12000 Series Router.
Support was added on the Cisco XR 12000 Series Router for the following
hardware:
Cisco XR 12000 SIP-401
•
Cisco XR 12000 SIP-501
•
Cisco XR 12000 SIP-601
•
Support was added on the Cisco XR 12000 Series Router for the following
SPAs:
Cisco 2-Port and 4-Port Channelized T3/DS0 SPA
•
Cisco 2-Port and 4-Port T3/E3 Serial SPA
•
Support for the following features was introduced:
Subinterfaces with permanent virtual circuits (PVCs)
•
Frame Relay encapsulation on serial main interfaces and PVCs on the
•
following hardware:
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Cisco 8-port Channelized T1/E1 SPA
–
Cisco 2-Port and 4-Port Channelized T3/DS0 SPA
–
Cisco 2-Port and 4-Port T3/E3 Serial SPA
–
–
Cisco 1-Port Channelized OC-3 SPA
–
Cisco 1-Port Channelized OC-12 SPA
–
Cisco 1-Port Channelized OC-48 SPA
Cisco 1-Port Channelized OC-12/STM-4 ISE Line Card
–
499