Cisco Linksys WAG310G Manuel de l'utilisateur - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco Linksys WAG310G. Cisco Linksys WAG310G 39 pages. Wireless-g adsl2+ iad gateway
Imprimer la page
Chapter3
L2TP Passthrough
Layer 2 Tunneling Protocol is the
method used to enable Point-to-Point sessions via the
Internet on the Layer 2 level. To allow L2TP tunnels to pass
through the Gateway, keep the default, Enable.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Access Restrictions > Internet Access Policy
The Internet Access Policy screen allows you to block or
allow specific kinds of Internet usage and traffic, such as
Internet access, designated services, and websites during
specific days and times.
Access Restrictions > Internet Access Policy
Internet Access Policy
Internet Access Polcy
Access can be managed by a
policy. Use the settings on this screen to establish an
access policy (after Save Settngs is clicked). Selecting a
policy from the drop-down menu will display that policy's
settings. To delete a policy, select that policy's number
and click Delete. To view all the policies, click Summary.
Summary
The policies are listed with the following information: No.,
Policy Name, Days, and Time of Day. To delete a policy,
select Delete. To return to the Internet Access Policy screen,
click Close.
Wreless-G ADSL2+ IAD Gateway
Advanced Configuration
Summary
Status
Policies are disabled by default. To enable a policy,
select the policy number from the drop-down menu, and
select Enable.
To create a policy, follow steps 1-11. Repeat these steps to
create additional policies, one at a time.
1.
Select a number from the Internet Access Policy drop-
down menu.
2.
To enable this policy, select Enable.
3.
Enter a Policy Name in the field provided.
4.
Click Edt Lst of PCs to select which computers will be
affected by the policy. The Internet Access PC List screen
appears. You can select a computer by MAC address or
IP address. You can also enter a range of IP addresses
if you want this policy to affect a group of computers.
After making your changes, click Save Settngs to
apply your changes, or click Cancel Changes to cancel
your changes. Then click Close.
Internet Access PC List
1