Epson Perfection V100 Series Manuel d'information sur les produits - Page 5

4. Make sure the film strip is placed as shown.

5. Place the film holder on the document table so that it is

aligned as shown. Make sure the tab with the film icon on

the film holder fits into the area with the same icon on the

scanner.

6. Make sure you removed the document mat. See page 4.

7. Close the scanner cover.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

page 6.

Placing Slides in the Holder

You can scan up to four 35 mm slides at a time using the slide

portion of the film holder.

Note:

Make sure the white stickers on the back of the film holder and the

areas around them are not scratched, dusty, or covered in any way. If

the areas are obscured, the scanner may have trouble recognizing

your slides in Full Auto Mode.

Do not cover the small holes on the film holder.

1. Place the film holder on the document table so that it is

aligned as shown. Make sure the tab with the slide icon on

the film holder fits into the area with the same icon on the

scanner.

2. Place up to four slides in the film holder with the shiny base

side facing down. Your images should appear backwards on

the side that faces up. Your images should be oriented as

shown.

Note:

Make sure you place the long edge of the slide in the film holder

as shown above, for both landscape and portrait-oriented photos.

3. Make sure you removed the document mat. See page 4.

4. Close the scanner cover.

When you are finished scanning slides, be sure to replace

the document mat before scanning documents or photos.

See page 6.

7/06

Epson Perfection V100 Photo

Epson Perfection V100 Photo - 5