Cisco Physical Access CIAC-GW-K9 Installation et configuration - Page 9
Parcourez en ligne ou téléchargez le pdf Installation et configuration pour {nom_de_la_catégorie} Cisco Physical Access CIAC-GW-K9. Cisco Physical Access CIAC-GW-K9 26 pages. Physical access gateway
Également pour Cisco Physical Access CIAC-GW-K9 : Manuel de démarrage rapide (17 pages)
Imprimer la page
Chapter 2
Installing and Configuring the Cisco Physical Access Gateway
Figure 2-5
for 10-pin and 5-pin reader interface connections. The wire connectors from the reader device are shown
in parentheses. If attaching a second reader, use the alternative connections shown in the column on the
far right.
Figure 2-5
1
2
3
4
5
6
7
8
OL-32499-01
shows the location of the Wiegand interface connections. The table describes the connections
Wiegand Interface on the Gateway and Reader Modules
Chassis
Label
Description
PWR
+12v
GND
Ground
D0
Data 0
D1/CLCK
Data 1
DRTN
Shield
2
GRN
Output
RED
Output
BPR
Output
(Beeper)
One Reader
First Reader in a
10 Wire Connection
5 Wire Connection
1
PWR
(red)
PWR
GND (black)
GND (black)
D0
(green)
D0
D1/CLCK (white)
D1/CLCK (white)
DRTN
(shield)
DRTN
GRN
(orange)
GRN
RED
(brown)
----------
BPR
(yellow)
----------
(yellow)
Cisco Physical Access Gateway User Guide
Installing the Cisco Physical Access Gateway
Second Reader in a
5 Wire Connection
(red)
PWR
(red)
GND (black)
(green)
----------
----------
(shield)
DRTN
(orange)
----------
3
GRN
(orange)
----------
(shield)
2-9