Cisco VG202 Manuel de configuration du logiciel - Page 34
Parcourez en ligne ou téléchargez le pdf Manuel de configuration du logiciel pour {nom_de_la_catégorie} Cisco VG202. Cisco VG202 50 pages. Voice gateways
Également pour Cisco VG202 : Manuel d'installation du matériel (50 pages), Manuel (10 pages), Manuel d'installation du matériel (48 pages), Manuel de démarrage rapide (19 pages)
Imprimer la page
Configuring the Voice Interface for Cisco CallManager
17.
18.
19.
20.
21.
22.
23.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
VG# enable
Step 2
configure terminal
Example:
VG# configure terminal
Step 3
stcapp ccm-group group-id
Example:
VG(config)# stcapp ccm-group 1
Step 4
stcapp
Example:
VG(config)# stcapp
Step 5
stcapp feature access-code
Example:
VG(config)# stcapp feature access-code
Step 6
stcapp feature speed-dial
Example:
VG(config)# stcapp feature speed-dial
Step 7
voice-port slot-number/port
Example:
VG(config)# voice-port 0/0
Step 8
timeouts initial seconds
Example:
VG(config-voiceport)# timeouts initial 60
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
4-8
sccp
sccp ccm group group-number
associate ccm identifier-number priority priority-number
dial-peer voice tags pots
service stcapp
port port-number
exit
Purpose
Enters privileged EXEC mode.
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Configures the Cisco CallManager group number for use
by the SCCP Telephony Control Application (STCAPP).
Enables STCAPP.
Enables STC application feature access codes and enters
their configuration mode.
Enables STC application feature speed-dial codes and
enters their configuration mode.
Enters voice-port configuration mode.
Configures the initial digit timeout value for a specified
voice port.
Chapter 4
Configuring Voice
OL-16191-01