Cisco VG30D Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco VG30D. Cisco VG30D 13 pages. Voice gateway

Back Panel Equipment

LAN

Note

P1 and P2

Power

Back Panel Equipment

Cisco VG30D Voice Gateway Quick Start Guide

Three LEDs indicate LAN activity. The TxD LED flashes amber on transmission

of a packet. The Link/RxD LED flashes green on receipt of a packet. The green

Speed LED is ON for 100 Mbit/s or OFF for 10Mbit/s. If Ethernet is not

connected, these LEDs will remain off.

The RxD LED will flash for any traffic on the Ethernet, regardless of destination.

The two amber Port LEDs are labelled P1 and P2. Together with the STATUS

LEDs, they indicate unit status. When the unit is operating normally and all is

well, these LEDs turn on and off every few seconds with all STATUS LEDs off.

When a problem exists, the Port LEDs will show the problem's location (P1 or P2,

or if both P1 and P2 are lit, a major alarm exists). The STATUS LEDs will then

indicate the problem. If more than one has a problem, they will be shown in a

cycle of 5 seconds each.

The Power LED includes two functions. When power is applied, it comes on amber

to indicate that the unit is in self-test mode. When the self-test satisfactorily

completes, the LED changes to green to indicate that the unit is functioning

correctly.

This section describes the

switches that are shown in

Cisco VG30D Voice Gateway

Figure

back panel ports and

78-19034-01