The
light flashes and after a moment the CX4600 starts
On
printing.
If you need to stop copying at any time, just press the y
button. Do not pull out paper that is being printed; it will be
ejected automatically into the output tray.
Note:
The copies may not be exactly the same size as the original.
Making 10 or More Copies
If you want to make 10 or more copies at a time, press the
button until you see "
Copy
the CX4600 to print up to 100 copies. Load enough paper for
the number of copies you want to make (up to 100) and start
copying.
The CX4600 will continue making copies until it runs out of
paper. Then the red m
Error
copies, load more paper and press the x
button to resume. If you don't need any more
x
Start B&W
copies, press the y
button.
Stop
Note:
When making a lot of copies, it is a good idea to remove the printed
copies from the output tray after every 10 sheets or so.
Speeding Up Printing
If you want to make a copy quickly and do not need high
quality, you can print a "draft" copy. The print quality is
reduced, but the copy is printed faster.
Load plain, letter-size paper and select
on the control panel. When you are ready to copy, press and
hold down the y
button, then press the x
Stop
button (to copy in color) or the x
in black and white). When the
both buttons.
Printing From a Memory Card
You can print photos directly from your digital camera's
memory card; just insert it into the CX4600's memory card
slot and you're ready to print.
If your digital camera supports DPOF (Digital Print Order
Format), you can pre-select the photos you want to print
while the card is still in the camera. Then, when you insert the
card in the CX4600, it knows which photos to print and how
many copies of each.
Note:
You can print only in color when printing directly from a memory card;
you cannot print in black and white.
" in the
window. This tells
–
Copy
light comes on. To make more
or
Start Color
and
Plain Paper
Start Color
button (to copy
Start B&W
light starts flashing, release
On
Inserting a Memory Card
1. Make sure the CX4600 is turned on but not connected to
Stop
your computer (or your computer is turned off).
2. Open the memory card door.
3. Insert your card into the correct slot. (See page 4 for
details.)
Memory card
light
Letter
The memory card light flashes and then stays on.
4. Close the memory card door. Now you can:
Print an index sheet so you can select which photos to
print
Print all the photos on the card
Print photos pre-selected on your camera using DPOF
When you want to remove the card, make sure the memory
card light is not flashing, then pull the card straight out of its
slot.
Caution:
Do not remove the card or turn off the CX4600 while the memory
card light is flashing; you may lose data on the card.
6/04
Epson Stylus CX4600
Insert just one
card at a time
Epson Stylus CX4600
- 7
Imprimer la page