Epson Stylus Photo RX600 Bulletin d'information sur les produits - Page 3

Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson Stylus Photo RX600. Epson Stylus Photo RX600 6 pages. Product support bulletin(s)
Également pour Epson Stylus Photo RX600 : Conseils (2 pages), Fiche d'information sur le produit (4 pages), Informations sur le produit (19 pages), Brochure (2 pages), Manuel de configuration (2 pages), Commencer ici Manuel (10 pages), Manuel de démarrage rapide (28 pages), Manuel de l'utilisateur (12 pages), Mise à jour (1 pages), Bulletin d'information sur les produits (1 pages), Spécifications (2 pages), Comment copier et imprimer (20 pages), Manuel d'instruction (4 pages)

Imprimer la page
Epson Stylus Photo RX600 Bulletin d'information sur les produits
Updating the firmware:
1.) Configure the Mac and the print server for TCP/IP.
2.) Download/copy the "WLEP399.bin" firmware file from the epson10651.sea.hqx to
the Apple Desktop.
3.) Navigate to Macintosh HD>Applications>Utilities>Terminal
4.) At the terminal screen do the following:
1. Type cd desktop then press the RETURN key
2. Type tftp <ipaddress* of the print server> then press the RETURN key
3. At the tftp> prompt, type binary then press the RETURN key
4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key
*Where ipaddress is the IP address of the Wireless print server.
135.79.2.468 or 10.0.1.3
**Where WLEP399.bin is the filename of the 3.99 firmware update.
5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes
were sent. This means the update is complete.
5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the
print server. At WP-Admin in the search screen, click on CLEAR, then click on START for
the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.
Search for the printer:
Once the update is complete, open the Print Center.
Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus
Photo 2200 printer.
Page 2 of 2
Examples