Epson Stylus Scan 2500 Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 pages. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Également pour Epson Stylus Scan 2500 : Manuel de l'utilisateur (7 pages), Fiche d'information sur le produit (4 pages), Spécifications (2 pages), Fiche d'information sur le produit (4 pages), Bulletin d'information sur les produits (12 pages), Informations sur le produit (12 pages), Commencer ici (4 pages), Manuel (11 pages), Bulletin d'information sur les produits (3 pages), Liste des pièces (9 pages), Manuel en ligne (10 pages), Commencer ici (4 pages), Informations complémentaires (12 pages)

Slide the transportation lock out, as illustrated below, to release the scanner

carriage.

Note:

Slide the transportation lock in to lock the scanner carriage before transporting the

Stylus Scan.

Close the maintenance cover and document cover.

Attaching the Paper Support

Insert the paper support into the slots at the rear of the Stylus Scan.

Make sure that the Stylus Scan is turned off.

Check the label on the back of the Stylus Scan to make sure the voltage required

by the Stylus Scan matches that of the electrical outlet you plug it into. Also, make

sure that you have the correct power cable for your power source.

Caution:

It is not possible to change the Stylus Scan's voltage. If the rated voltage

and your outlet voltage do not match, contact your dealer for assis-

tance. Do not plug in the power cord.

If the power cord is not attached to the Stylus Scan, connect it to the AC inlet at

the back of the Stylus Scan.

Plug the power cord into a properly grounded electrical outlet.

Setting up your Stylus Scan 2500