DIGIWAY PTY P550 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DIGIWAY PTY P550. DIGIWAY PTY P550 12 pages. Sliding gate motor
Également pour DIGIWAY PTY P550 : Manuel d'instruction (13 pages)

Imprimer la page

1. General Descriptions

The P550 and P750 sliding gate motors was designed for heavy duty industry track gate or cantilever

gate. Heavy duty three phase industry motor driven by VSD (variable speed drive), gate can run at

different speeds. Built in encoder and intelligent controller combination can make the gate running

more smoothly. The controller can receive the signals from swipe card, loop detectors, remote control,

photo-electric beams and any kind of access control system. Galvanised metal sheet and powder coated

high quality cabinet(1.5mm thickness) has remove door (P750) and plenty of room for the access

control accessaries including din rail mounting. 50VA transformer (12V/24v/2A) can directly drive

magnetic lock, warning lights etc.

2. Technical Specifications

Power supply

Output voltage

Motor rate

Gate type

Drive speed

Max. gate length

Fully programmable

Accessories power supply

3. Control Board layout

1) Plug to the inverter

3) Drive signal LED

5) DIP switch

7) Gate status display LED-Red

9) CLS close button

11) OPN open button

13) Control signal display LED

15) Control signal plug

DIGIWAY PTY LTD

CONTROL INPUIT AND BUTTON

230/240V AC at 10A

230V AC three phase (via) inverter, Max. 0.75KW

Three phase two poles 0.55KW (P550) or 0.75KW (P750)

Track or cantilever

Up to 700mm/sec (with big opinion)

No limitation

Auto close time, PE trig close time etc.

12V@2A or 24@2A, Max. 50VA, protected by 1A fuse

Fig-2

2) Lock relay output

4) Gate closed relay output

6) Gate status display LED-Green

8) OSC open/stop/close button

10) PED pedestrian button

12) 6 pins remote plug

14) Input interface power 12V AC

16) Encoder plug