Epson C6000P Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson C6000P. Epson C6000P 8 pages. Roll to roll system

LABEL REWINDER ONLY INSTALLATION

If you do not have the printer plate (JPL-6000P), place and align the rewinder behind the

printer and than follow the instructions from STEP 3.

ATTENTION.

The unit is equipped with an

extension plate as default, for this

configuration it is not required to be

used.

STEP 1

Place carefully the printer into the lock guides.

STEP 2

On the back side, place and screw the

rewinder to the printer plate.

Do not tighten the knobs until the rewinder will

be properly aligned to the printer.

STEP 3

Remove the additional support and the outer

disk.

Load the empty cardboard core onto the core

holder.

Slide in the outer disk onto the core holder and

keep it close to the media edge.